RCBS Uniflow Powder Measure

The RCBS Uniflow Powder Measure throws consistently accurate charges reload after reload. Powder pours uniformly from measuring cylinder into case thereby eliminating the hazards of “overloads” caused by clogging when charges are dumped”. Changes easily from charge to charge without emptying powder hopper. Numbered measuring screw is used for reference to find a given charge at a later date. The measuring cylinder has precision ground surfaces and slides into the honed main casting for a precision fit. Standard 7/8″- 14 thread. Includes stand plate drilled for easy mounting on a bench or under a reloading die lock ring. Two drop tubes for .22 caliber and up are supplied. The Uniflow Powder Measure is fully capable of accurately measuring all three major powder types – ball cylindrical and flake. It will even cut the cylindrical powders so that a precise charge can be obtained. NOTE: The Uniflow Powder Measure should be used in conjunction with an accurate powder scale for setting the original charge and for checking charges occasionally during the run. *Not for use with black powder. Technical Information: Material: Iron and Steel
Metering Chamber: Small
Features: Kit has an adjustable cylinder with a numbered measuring screw for reference to find a given charge at a later date measuring cylinder has precision ground surfaces and slides into the honed main casting for a precision fit.
Attachment: Stand Plat (drilled for bench or press mounting under a reloading die lock ring)
Includes: 2 drop tubes for 22 caliber and up (Optional 17-20 caliber drop tube available separately (Item# 521-167)
Powder Charge Thrown: 5 to 110 grains of Ball Flake or Extruded powder Note: NOT FOR USE WITH BLACK POWDER


More Information HERE