Barrel nut wrench Pro for the Smith & Wesson MP15-22

This combo Vice Jaws and Barrel Nut Wrench for your Smith & Wesson M&P15-22 enables you to install muzzle brakes clean the bore and chamber and perform other maintenance on your firearm.

Barrel Nut Wrench

• The lugs are designed to fit snugly with minimum movement to keep the nut from getting damaged.
• The inside of the wrench will fit over most standard A1 and A2 flash hiders as well as Yankee Hill and others.
• The outside of the wrench fits nicely inside the stock hand-guard.
• There are two wrench flats for a 15/16 open end wrench or crows foot wrench if you want to use a torque wrench.
• This is the Professional/Gunsmith version of the barrel nut wrench for the Smith & Wesson M&P 15-22. You will get many years of trouble-free use from this barrel nut wrench.
• This wrench will fit over most standard diameter muzzle devices such as the A2 birdcage but the barrel nut and hand-guard end cap will not. Therefore you have to remove the muzzle device to remove the barrel nut and barrel.

Features and Benefits

• Designed to work with the Smith & Wesson M&P15-22.
• Lifetime guarantee.
• Designed developed and manufactured in the USA.

Installation Tips

The barrel nut and hand-guard end cap will not fit over a standard A2 birdcage. You have to remove the flash hider to remove the barrel nut and barrel. If you have removed the factory hand-guard end cap you don't need to remove the flash hider to tighten the barrel nut.

More Information HERE