NOW IN STOCK Dillon’s CV-2001 Vibratory Case Cleaner is the largest in the industry. Its 12-1/2 quart bowl capacity will allow you to polish up to 1300 .38/.357 or 550 .30-06 cases per hour. Not only is our capacity greater but our motor is larger in...
Dillon’s accessory handle gives the reloader an entirely new “feel.” A roller handle reduces operator fatigue during long reloading sessions and makes primer seating easier. Fits the RL550 and XL650 loaders aswell the SL900 Shotshell Reloader. More I...
IN STOCK ORDER NOW – IMMEDIATE DELIVERY ! The Dillon Basic 550 is essentially a stripped down RL550 Reloading Machine without the automatic priming and powder systems. The DIllon BL550 is still capable of loading more than 160 calibers just like its ...
THIS IS A SPECIAL ORDER PURCHASE – DELIVERY WILL BE 4-5 WEEKS DEPENDING ON AVAILABILITY Shown with optional 50 BMG Case Trimmer and optional 50BMG Carbide Sizing Die. Four station semi-progressive the shellplate may be rotated either clockwise or cou...
THIS IS A SPECIAL ORDER PURCHASE – DELIVERY WILL BE 4-5 WEEKS DEPENDING ON AVAILABILITY .308 IN STOCK Dillon Three-Die Rifle Die Sets include a sizing/ depriming reloading die a bullet seating reloading die and a taper crimp reloading die. (Sizing/De...
IN STOCK ORDER NOW 900 grain/57 gram capacity Accurate to0.1 grain/0.01 gram Uses four AA batteries (included) Comes with its own AC adapter Scale check weight included All the electrical/electronic components of Dillon equipment are covered by a one...
NOW IN STOCK ORDER NOW !!! Top quality beam scales for reloading from Dillon Precision Magnetically dampened 511 grain capacity accurate to within +/- 0.1 grain. More Information HERE
NOW IN STOCK ! The Dillon Precision Low Powder Sensor provides an audible and visual reminder when it’s time to refill your powder reservoir. When the powder level drops to about 1000 grains a buzzer will sound and a bright LED will light. More Infor...
Magnum rifle cartridges can require from 70 grains to well in excess of 100 grains for a single charge. Our new Dillon “Belted Magnum” Powder System feature a new maximum-capacity steel powder bar that can dispense more than 100 grains of extruded IM...
Sizing/Depriming Die Our sizing/depriming reloading dies feature a unique “floating decap assembly” with a snap spring that throws the spent primer off the pin and eliminates the problem of primer “draw back” that often occurs when decapping military...
Now in stock !! Extra powder dies allow you to move your powder measure from toolhead to toolhead without changing the “belling” adjustment. Toolhead not included. These are for the RL550 XL650and RL450 equipped with the automatic powder system More ...
THIS IS A SPECIAL ORDER PURCHASE – DELIVERY WILL BE 4-5 WEEKS DEPENDING ON AVAILABILITY SHINE? You bet your brass! Dillon Precision has developed another exciting new product to make your reloading faster and easier. Rapid Polish 290 is the first car...
IN STOCK Change from one caliber to another in minutes. These Pistol Calibre Conversion Kits are for the Dillon RL550B Reloading Press Contains: Shellplate powder funnel and locator buttons. available in all calibers; please specify caliber desired. ...
IN STOCK ORDER NOW – IMMEDIATE DELIVERY ! The Dillon RL550B reloading press is able to load rifle as well as pistol cartridges The Dillon RL550B reloading press uses standard 7/8 by 14 thread per inch dies as long as they deprime in the size reloadin...
THIS IS A SPECIAL ORDER PURCHASE – DELIVERY WILL BE 4-5 WEEKS DEPENDING ON AVAILABILITY This heavy-duty nylon cover from Dillon Precision comes equipped with a D-ring allowing the zipper to be locked ensuring your Dillon Shotshell reloading press or ...
THIS IS A SPECIAL ORDER PURCHASE – DELIVERY WILL BE 4-5 WEEKS DEPENDING ON AVAILABILITY The Dillon Precision SL900 Shotshell reloader is factory adjusted to load AA hulls the extra long shot hopper holds 25lbs. The Dillon SL900 Shotgun reloading pres...
THIS IS A SPECIAL ORDER PURCHASE – DELIVERY WILL BE 4-5 WEEKS DEPENDING ON AVAILABILITY These are conversion kits used to convert your SL900 shotshell reloader to a different shotgun gauge Conversion kits available - - 12 gauge – 20 gauge – 28 gauge ...
Change from one caliber to another in minutes. These Pistol Calibre Conversion Kits are for the Dillon Precision Square Deal B Reloading Press - The Dillon Precision calibre conversion kits for Square D B reloading press kit include - Carbide size re...
.38 SPECIAL IN STOCK – OTHER CALIBRES ARE A SPECIAL ORDER PURCHASE – DELIVERY WILL BE 4-5 WEEKS DEPENDING ON AVAILABILITY The Dillon Square Deal B is the perfect reloader for loading the common straight walled pistol cartridges at a rate of 300-500 r...
THIS IS A SPECIAL ORDER PURCHASE – DELIVERY WILL BE 4-5 WEEKS DEPENDING ON AVAILABILITY PLEASE ENQUIRY FOR CALIBER YOU REQUIRE Change from one caliber to another in minutes. These Calibre Conversion Kits are for the Dillon Precision Super 1050 Reload...
THIS IS A SPECIAL ORDER PURCHASE – DELIVERY WILL BE 4-5 WEEKS DEPENDING ON AVAILABILITY The Dillon Precision Super 1050 Reloading Press is a factory adjusted commercial standard reloading press capable of loading 1000-1200 rounds per hour. The Dillon...
Change from one caliber to another in minutes. These Calibre Conversion Kits are for the Dillon Precision XL650 Reloading Press – The Dillon Precision calibre conversion kits for Square D B reloading press kit include - Powder funnel – Casefeed adapt...
Fits your Dillon XL650 Reloading Press so you don’t have to adjust reloading dies when switching calibers. These Precision tool holders hold your dies in perfect alignment making caliber changes quick and easy. More Information HERE
The Dillon Primer Early Warning System allows you to focus on loading instead of worrying about failing to seat a primer and is an easy slip-on attachment to the auto prime system. More Information HERE
The Dillon metal primer flip tray makes it easy to fill primer pick-up tubes. The heavier metal tray makes it less likely for primers to bounce over while filling and the larger diameter of our try allows use of larger primer packaging such as used b...
A Dillon Primer Magazine can be located on the outside of the press and is available for both small and large primers they are used for holding the primers. Small : 22030 Large : 22031 Size Small LargeMore Information HERE
Dillon Primer Pickup Tubes are the secret of really punching out a lot of rounds in a hurry. Have these tubes filled and ready to go. Your choice large or small. Options 20056: – 2 Small & 2 Large – £29.95 20049: – 4x Small – £29.95 20050: – 4x L...
With a Dillon Quick Change Assembly and a caliber conversion kit (sold separately) you can convert in less than a minute. Complete with: Toolhead Powder Measure Powder Die Toolhead Stand. Codes RL550 Quick Change Kit – 22058 XL650 Quick Change Kit – ...
Rifle headspace case gages assist in proper size die adjustment and in checking cases for whether they need to be trimmed. Essential for long case life especially with semi-automatic firearms! Made of stainless steel for long life. Caliber .223 .308M...
Dillon RL550 Casefeeder Caliber Conversion kits are necessary to change the RL550 Casefeeder from one caliber to another. It may also be necessary to purchase a different casefeed plate. Caliber 38 SPL / 357More Information HERE
Stock Number: 97016 The Dillon RL550b Machine Maintenance kit provides you with everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for you machine. More Information HERE
The Dillon RL550b Spare Parts Kit Includes the following items :- 1 550 Brass Tip Set Screw 1 550 Index Ball 1 550 Index Ball Spring 1 Seating Punch (Small) 1 Seating Punch (Large) 1 550 Primer Cup Spring 1 550 Slide Return Spring 1 Cartridge Spring ...
Stock Number: 13909 With the Dillon RL550b Toolhead don’t Adjust dies when switching calibers. These Precision tool holders hold your dies in perfect alignment making caliber changes quick and easy. Dillon Powder Die #20064 sold separately. More Info...
THIS IS A SPECIAL ORDER PURCHASE – DELIVERY WILL BE 4-5 WEEKS DEPENDING ON AVAILABILITY Additional powder measure assembly for you Dillon SL900 Shotshell press to stay on the toolhead. Never change powder measurements again! More Information HERE
The sizing/depriming die is full-length to minimum tolerances sizing cases down to function in semi- and full-automatic firearms. We strongly suggest that a headspace case gage be used to correctly adjust the size die. For high volume users such as c...
Until now reusing military brass with its crimped primer pockets has been a tedious task. The Dillon Super Swage 600 is a solution that is remarkably simple that bolts to your bench and allows you to swage the primer pockets with speed and ease. The ...
Don’t risk downtime waiting for a replacement part! The Dillon XL 650 Spare Parts Kit includes the following : – 1 650 Ring Indexer 1 650 Index Return Spring 2 650 Shellplate Caps 1 Case Insert Slide Spring Cap 1 Slide Spring Retaining Pin 1 650 Inde...
Dillon XL650 Billet Aluminum Color Anodized Toolheads Stock Number: 650 BTH The Dillon XL650 Billet Toolheads are a lighter weight Aluminum toolhead from Dillon that are machined from billet using the same precise CNC machining as our standard toolhe...
Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Aluminium – Tempered 60...
Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Aluminium – Tempered 60...
Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Aluminium – Tempered 60...
Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Aluminium – Tempered 60...
Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Aluminium – Tempered 60...
Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Aluminium – Tempered 60...
Available in 1 inch Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Alu...
Available in 1 inch Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Alu...
Available in 1 inch Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Alu...
Available in 1 inch Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Alu...
Available in 1 inch Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Alu...
Available in 30mm Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Alumi...
Available in 30mm Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Alumi...
Available in 30mm Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Alumi...
Available in 1 inch Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Alu...
Available in 1 inch or 30mm Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of bi...
Available in 1 inch or 30mm Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of bi...
Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Aluminium – Tempered 60...
Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Aluminium – Tempered 60...
Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Aluminium – Tempered 60...
Guaranteed with DNZ Reaper Scope Mounts - Eliminates or reduces scope damage from tightening rings – Ring placment allows for extra eye relief adjustment – Up to 4 times more thread length in rings – Full 1/2″ – Made of billit Aluminium – Tempered 60...
Ear Defenders Canvas Carry Case Protective carrying case with belt loop to hold either passive or electronic ear protection Green or Black More Information HERE
Ex Demo – In Brand New Condition Battery has been fitted and rangefinder has just been handled – in perfect working order as new Scout DX ARC 1000 Bushnell 6×21 5-1000 yards Proudly designed and engineered in the USA Selective Targeting System – Auto...
Ex Demo – 9/10 condition ( Box is tatty) includes case and box Bushnell Scout 1000 Rangefinder 5 yards – 1000 yards Reflective – Min – 5 Yards – Max – 1000 yards Tree – Min – 5 Yards – Max – 600 yards Deer – Min – 5 Yards – Max – 300 Yards 5×24 Laser...
Ex Display – 9.5/10 Mint Condition – Recent Service from Leupold 9.7.15 Leupold Mark 4 4.5-14×50 LR/T Illuminated Mildot Side Focus:- 25 yards – infinity 30mm Tube 1 – 11 Position Rheostat (red) MI Turrets MEtric 0.5cm Clicks More Information HERE
EX Military Hensoldt Riflescope ZF SSG 3-12×56 Illuminated FFP Mildot with Ranging Scale Tactical This Hensoldt ZF SSG 3-12×56 Illuminated FFP Riflescope was taken off of a Accuracy International G22 AWM (Arctic Warfare Magnum) .300WM this will be on...
Falcon M25 FFP 5.5-25×50 ML16 (Skeleton) Riflescope The Falcon M25 FFP 5.5-25×50 ML16 Riflescope is one of only a few first focal plane riflescopes at this price point ticking many of the boxes a target shooter is requiring in a budget FFP riflescope...
Guaranteed to be perfectly flat and straight within .002″ These Weaver-style mounts are the ideal mount for the varmint tactical or long-range shooter. They are produced on CNC equipment from solid bar stock for an extremely strong gunsmith-quality b...
Guaranteed to be perfectly flat and straight within .002″ These Weaver-style mounts are the ideal mount for the varmint tactical or long-range shooter. They are produced on CNC equipment from solid bar stock for an extremely strong gunsmith-quality b...
These fully machined all steel matching sets provide the utmost in strength and scope alignment. When used with the Farrell Excel base they are guaranteed to provide a center line less than .005″. You can spend more money but you won’t find a higher ...
Phone or Email for availability or we can special order for you today – 01803 392306 or [email protected] These fully machined all steel matching sets provide the utmost in strength and scope alignment. When used with the Farrell Excel base...
Guaranteed to be perfectly flat and straight within .002″ These Weaver-style mounts are the ideal mount for the varmint tactical or long-range shooter. They are produced on CNC equipment from solid bar stock for an extremely strong gunsmith-quality b...
Guaranteed to be perfectly flat and straight within .002″ These Weaver-style mounts are the ideal mount for the varmint tactical or long-range shooter. They are produced on CNC equipment from solid bar stock for an extremely strong gunsmith-quality b...
The Forster Bench Rest Powder Measure is the perfect powder measure for a reloader looking for a measure that is loaded with features and built to last. This powder measure features a charge arm/operating handle that meters the powder and dispenses a...
There are no other dies on the market quite like Forster’s new Bushing Bump Neck Sizing Reloading Dies! With Forster new reloading dies you get a die and a three-bushing set designed to improve the accuracy of your cartridges. In one simple step the ...
No need to complicate the reloading process. Forster Co-Ax Reloading Press keeps it simple while still delivering famous Forster precision. The Forster Co-Ax Reloading Press comes with several unique features that help make it truly one of a kind inc...
Forster Reloading customers have told Forster Reloading that the long handle that comes standard on our exclusive Co-Ax® single stage press delivers more leverage than necessary for several small rifle cartridges…for seating and priming operations…an...
The Forster Bench rest seater reloading die and full length sizing reloading die set the standard for quality and precision. That’s why they are first choice of some of the worlds toughest reloading critics – including US marines Navy seals and olymp...
Forster Full Length Sizer reloading dies should be used after each firing or after several firings when the resulting brass flow will require the case to be full-length sized. Allows case to be re-chambered in any SAAMI rifle chamber with minimal pla...
Forster Neck Size Dies are a Great choice for reloaders who opt to retain the fire-formed dimensions of their cases and minimize excessive headspace. Perfect for sizing the case neck only to a fixed dimension; does not bump the shoulder or size the b...
The old standby! The Original Forster Case Trimmer is the right choice for most calibers with bullet diameters from .171″ to .459″ . It is actually a fine miniature lathe with a superior shell holder design based on a Brown & Sharpe type collet. ...
The Forster powder measure stand is made from solid metal attaches to Forster Bench Powder Measure and allows for much more convienent use of the Forster bench rest powder measure ensuring you have the “pefect powder measure” at the correct height. I...
Forster replacement decapping pins are avaialble in three sizes: PPC Long and Short. PPC pins fit .060 inch diameter flash holes Long and Short pins fit .080 inch diameter flash holes. All pins are packaged in five. Forster Decapping Pins Length Shor...
This 12 pack of Forster die locking rings features an easy to use cross bolt that connects the two ends of the ring instead of a traditional screw style design that tightens directly into the threads of the reloading die. This allows the reloader to ...
Allows use of standard shellholders in the Forster Co Ax press in place of the universal jaws that come with the Co Ax press Also allows reloading of some non standard calibres More Information HERE
Forster’s Ultra™ Micrometer Seater Reloading Die includes all the popular straight line seating features of our original Bench Rest® Seater Reloading Die plus an ultra-accurate micrometer adjustment feature for adjusting bullet seating depth. The For...
The Frankford Arsenal Platinum Series Precision Scale delivers extreme accuracy for precise measurements of powder bullets cases or loaded rounds. Featuring a 1500 grain capacity with 1/10 grain accuracy you will be able to achieve the maximum potent...
The Frankford Arsenal Powder Trickler allows very small amounts of powder to be dispensed to achieve precise load weights. Dust/moisture covers protect powder while in the trickler. The Frankford Arsenal Powder Trickler is designed to work for all po...
Frankford Arsenal Brass Case Polish is a premium citrus scented brass polish that is specifically engineered for cartridge cases. This unique formulation is ammonia free to protect your brass from becoming brittle and won’t leave a residue like some ...
Frankford Arsenal Quick n Ez reloading tumbler is a revolutionary way to quickly and efficiently clean your brass from oxidation oils lube and fouling. Frankford Arsenal know how in reloading and gun smithing is evident in this products simplicity an...
G.P.I 1 inch Offset Mount For 1 inch Flashlight / Laser G.P.I Tactical 1″ Off-set Mount for 1″ Flashlight/Laser Offset your light or laser on your weapon for easier handling Fits weaver/picatinny style rail More Information HERE
THIS SCOPE RAIL MOUNT IS AVAILABLE IN 30MM AND 1 INCH SETUP ( CHOOSE YOUR OPTION IN THE DROP DOWN ) DUAL OFFSET WEAVER STYLE PICATINNY RAIL FOR MOUNTING A SECONDARY OPTIC FLASHLIGHT OE LASER CONSTRUCTED OF HARD ANODIZED ALUMINUM L : 1 – 1.8 INCH W: 1...
G.P.I Tactical .22 Laser Boresighter Set .22 Laser Bore Sighter Set Comes with one Arbor Laser Mounting & Adjusting Tools and Batteries Weight: 1.6 oz. More Information HERE
MATCH MOUNTS DOUBLE SCREW DESIGN FOR MAXIMUM GRIP BLACK MATTE FINISH INCLUDES ALLEN KEY ALLOY SUPER STRONG FREAT FOR AIRGUN / RIMFIRE MEDIUM – 14MM (FROM RING MEETS BASE TO BOTTOM OF RING) HIGH – 21MM (FROM RING MEETS BASE TO BOTTOM OF RING) Mount He...
SUPER STRONG STEEL CONSTRUCTION 1 INCH HEIGHT QUICK RELEASE FEATURE ON WEAVER BASE LEVER OPERATED QUICK RELEASE POLISHED GLOSS FINISH EQUIVALENT TO MOUNTS WHICH RETAIL OVER £50 + SO THESE MOUNTS ARE AN ABSOLUTE BARGAIN ! SIZES AVAILABLE :- LOW – 10MM...